Trinic Products
Trinic is the go to source for admixes and premixed concrete solutions. Trinic maintains total quality control and the flexibility to make custom mixes based on your desires.
Products
Explore Trinic Products:
TEC-10 to the GFRC Plasticisers, Set Accelerators, Retarders, Admixes and Premixed Concrete solutions.
Please contact Leisure Chef directly to order Trinic products.
Car VZ
CAR-VZ is a pre-blended powdered admixture for vertical carving applications. This one admix is used for the structure/scratch coat and the carve coat.
GFRC Premix
This complete blend of white Portland cement, graded Quartzite sand, Silica Fume and Trinic’s Tec-10 admix blend to provides maximum strength for both compression and flexibility.
Our FAST-SET mix, with CSA added, is blended so you can demold in 2-4 hours (depending on shop conditions).
GFRC SCC Fast Set
Our FAST-SET mix, with CSA added, is blended so you can demold in 2-4 hours (depending on shop conditions). It will not be as white as the regular premixes.
Nanoseal Matte
Topcoat for polished concrete, tile, marble, granite, brickpavers and concrete countertops. Single Component, easy to apply with high abrasion resistance is available in gloss or matte. Recommended number of coats varies.
Nanoseal
Topcoat for polished concrete, tile, marble, granite, brickpavers and concrete countertops. Single Component, easy to apply with high abrasion resistance is available in gloss or matte. Recommended number of coats varies.
H-13
Food Safe protection for concrete countertops and high performance concretes. Excellent stain, acid, and scratch resistance. H13 deeply penetrates concrete surfaces, forming a chemical bond to the concrete surface and is easy to repair if damaged.
AR Glass Scrim
Scrim is 39.37” (1 Meter) wide and available in 1 sq. ft. increments. Scrims are oriented continuous fiber fabrics, usually yarn or roving. The strands are inter-woven for extra strength and a binder applied to enhance the bond to the cement matrix.
1/2" AR Glass Fiber
OC offers AR glass fiber with the highest zirconia content available. All OC alkali resistant glass fiber products are manufactured in compliance with ASTM C1666/C 1666M, EN 15422 and under recommendations of PCI and GRCA.
3/4" AR Glass Fiber
OC offers AR glass fiber with the highest zirconia content available. All OC alkali resistant glass fiber products are manufactured in compliance with ASTM C1666/C 1666M, EN 15422 and under recommendations of PCI and GRCA.
Plasticizer
A proprietary blend of a powdered plasticizer with dispersing and wetting agents. Meets the requirements of ASTM C-494 A and F High Range Water Reducers. Designed for production of ultra high performance wet-cast & GFRC concrete.
Slurry Fill
Trinic Tec10 Admix is a multi-component powdered admixture for production of GFRC, RPC and ECC Concrete. Dosed at 3% for GFRC or 2% for Wet-cast, Tec-10 eliminates the 7-day wet cure. To increase compressive strength even more, add Z3-95 silica fume as a 10% cement replacement.
Stampshield
Specifically designed for use on stamped concrete, pavers and natural stone. It provides stain protection by penetrating and chemically reacting with the natural materials found in concrete and stone. The matte version will appear reddish orange in the bucket - this will dry clear.
Anti Skid
Coarse particle size grades of micronized polypropylene for adding texture, structure and anti-slip properties to a wide variety of paints and coatings.
Tec 10
Trinic Tec10 Admix is a multi-component powdered admixture for production of GFRC, RPC and ECC Concrete. IDosed at just 3% for GFRC or 2% for Wet-cast, Tec-10 eliminates the need for a 7-day wet cure.
Oxide Green
Pigment Dye
Deep Black
Pigment Dye
Cobalt Blue
Pigment Dye
Medium Red
Pigment Dye
Standard Yellow
Pigment Dye
Titanium Dioxide White
Color RZ
Pigment Dye